LED Light

Product Details:

• Main Housing,&CG Box: Powder coated, pressure die-cast Aluminum housing.
• Front Cover: Clear toughened glass.
• LED: LM80 certified high power LED.
• Lens: Suitable secondary lens for optimum light distribution.
• Gear: Inbuilt Electronic constant current driver.
• Internal Wiring: Teflon insulated, Cu. Conductor.
• Hardware: SS & Ms zinc plated & passivated.
• Ingress protection: IP65
• Lumen maintenance: 50,000 Hrs @ L70
• Operating temperature: -10⁰C to 50⁰C
• Rated voltage & frequency: 240V, 50Hz AC

• Industry, warehouse, Hangers, high ceiling work shops.

• Through Bracket / Eye bolt

• Open & Short circuit protection, reverse polarity protection and surge protection

• IS 10322(Pt.5/Sec.1)1985 / IEC 60598

Product Details:

• Main Housing,frame: Powder coated, pressure die-cast Aluminum  housing.
• Front Cover: Clear toughened glass.
• LED: LM80 certified high power LED.
• Lens: Suitable secondary lens for optimum light distribution.
• Gear: Inbuilt Electronic constant current driver.
• Internal Wiring: Teflon insulated, Cu. Conductor.
• Hardware: SS & Ms zinc plated & passivated.
• Ingress protection: IP65
• Lumen maintenance: 50,000 Hrs @ L70
• Operating temperature: -10⁰C to 50⁰C
• Rated voltage & frequency: 240V, 50Hz AC

• Petrol pum lighting and other Under canopy lighting applications.

• Through Bracket

• Open & Short circuit protection, reverse polarity protection, low and high voltage cut off and surge protection of up to 5KV.

Product Details:

• Main Housing,frame: Powder coated, pressure die-cast Aluminum housing.
• Front Cover: Clear toughened glass gasket.
• LED: LM80 certified high power LED.
• Lens: Suitable secondary lens for optimum light distribution.
• Gear: Electronic, constant current driver.
• Internal Wiring: Teflon insulated, Cu. Conductor.
• Hardware: SS & Ms zinc plated & passivated.
• Ingress protection: IP65
• Lumen maintenance: 50,000 Hrs @ L70
• Operating temperature: -10⁰C to 50⁰C
• Rated voltage & frequency: 240V, 50Hz AC

• Area lighting, security lighting, sports lighting, bill board, façade, Industry area and other general applications.

• Through Bracket

• Open & Short circuit protection, reverse polarity protection and surge protection

• IS 10322(Pt.5/Sec.5)1987 / IEC 60598

Product Details:

• Al Die cast Housing powder coated
• High efficiency, long life, LEDs
• High purity PMMA Lenses for superior performance
• Toughened glass with silicon gaskets for IP66 Protection
• Complete assembly with LED, Driver and accessories pre- wired up to terminal block in connector compartment
• Integral control gear compartment with connector
• Pure polyeseter white powder Coated front cover in CRCA Sheet
• Prefabricated Suitable for LH14 Highbay

• Cutout size 280X280 mm (Tolerance +2/-0mm)
• Designed for installation for recess mounting in canopy

• In-built Electronic LED driver

• Order 2’X2’ frame separately
• LXH14RF595 – Size 595 X 595 X 10mm
• LXH14RF450 – Size 450 X 450 X 10mm

• Energy Efficient : Saving in power Consumption
• LED Highbay is elegant, architectural and modern in design.
• Specially designed Lenses ensures better light distribution.
• Virtually maintenance free.

• Sleek and seamless Aesthetics. Seamless Integration with Ceilings
• Easy of assembly and maintenance

Product Details:

• Totally enclosed LED luminaire with high luminous efficacy
• LEDS and energy efficient driver.
• Sturdy vandal resistant light grey polycarbonate body with polyurethane gasket
• LED grade UV stabilized polycarbonate diffuser
• Sturdy polycarbonate clips for fixing diffuser to housing
• Waterproof cable gland ensures good ingress protection

• Energy efficient LED driver
• 3-way 5 amp GFP mains connector for 1 sq mm incoming cable.
• All accessories are pre-wired upto terminal block

• Stainless Steel mounting clips are provided for easy and quick installation

• Retail Spaces
• Food and Beverage industry
• Warehouse and storage Areas
• Manufacturing Areas
• Service Areas

Product Details:

• Thermal management: Specially designed heat sink for faster and effective heat dissipation
• Vandal resistance: Well built and rugged construction for all weather application
• Uniform light distribution: Dome shaped diffuser design nables maximum light distribution

• Rugged & light weight pressure die cast aluminum construction with dark gray finish
• Integral heat sink for better heat dissipation
• High power, high efficacy LED
• White powder coated internal reflector
• Thermally isolated driver and optical compartment
• Injection molded translucent white impact resistant polycarbonate diffuser
• Long life and heat resistant EPDM rubber gaskets
• Specially designed cable glands for wire entry
• Accessories pre-wired up to terminal block

• Suitable for pendent mounted using eye bolt
• Also suitable for ceiling mounting

• 5 way 10 Amps LILO connector for 1 sq mm incoming wire
• EPDM cable entry grommet suitable for power cable outer diameter up to 8.0mm

• Energy efficient electronic LED driver

Product Details:

• Energy efficient
• Quick maintenance
• Enhanced illumination

• Best-in-class LEDtechnology
• High efficiency, LM 80 compliant LEDs
• Best quality LEDs through proper binning for consistent colour, lumen output and forward voltage
• Options in colour temperature

• Specially designed for Indian power conditions
• Best-in-class design & manufacturing
• Complies to SELV design standards ensuring safety

• Uniform and glare-free lighting
• Effective light distribution ensuring high performance

• Special design for effective thermal management ensures long service life and consistent performance

• Luminaire consists of CRCA bottom frame, housing cover, control gear compartment dul epoxy polyester white powder coated
• Satin finish High Efficiency Translucence (HET) diffuser is sealed with bottom frame using XLPE gasket and specially designed pressure plates ensures positive locking
• Mounting system using specially designed knob with thrust pad
• High efficacy LEDs
• High performance LED driver mounted on removable gear tray and pre-wired upto terminal block
• IP65 from front after installation

• Designed for installation in RCC slab/metallic walkable sandwich panel ceiling with through & through cut

• Pharmaceutical Companies
• Micro Electrical Industries
• Laboratories
• Food Processing Industry
• Sterile Areas

Product Details:

• White Powder Coated Housing & frame in CRCA Sheet
• High Efficiency Translucence (HET) diffuser
• High efficacy LEDs
• IS 10322 part 5/Sec 1 1987 comply
• Thoughtfully designed IP20

• Sleek and seamless Aesthetics Seamless Integration with Ceilings
• Better Light Transmission & Immaculate effect
• Avoids dark patches and creates perfect diffusion of light
• Uniform and optimum light output
• Ideal Green Lighting Solution
• Comply for general purpose lighting
• Easy Installation and long service life
• Protection against dust, insects and small items entry into luminaire for safety.

• For Gypsum /POP applications additional Frame needs to be ordered separately. Order 9180P01025 for Aluminum. Or order 9180P01089 for M.S. Case lot 10 pcs / box.

• Ideal for Modern work spaces work area / office spaces, meeting rooms. Refurbish application with existing 2X2 grid convectional luminaire.

Product Details:

• Extruded aluminium white powder coated housing
• Edge lit optics from reflector+light guide plate+diffuser configuration
• Low wattage high efficient LEDs
• Electronic LED driver prewired upto terminal block
• Excellent heat dissipation through direct contact
• Designed and manufactured to comply with IS 10322 part 5/Sec 11987

• Suitable for Armstrong/CRG/TRAC/USG/Celotex

Additional Information:

• Item Code: LM25-361-XXX-65-G1

Product Details:

We are amid the most noteworthy names engaged in offering to our clienteles an extensive collection of LED Lights with Sensor.

Features:

• High quality

• Perfect finish

• Light weight

• Durable

Product Details:

• Luminaire consists of precisely manufactured, CRCA powder coated Housing, Bottom frame.
• Bottom frame is fixed with captive (loss proof) screws
• Satin finish high efficiency translucence (HET) diffuser is sealed with bottom frame and non-hygroscopic VHB gasket to ensure dust proofing
• Bottom frame and diffuser, with gasket and pressure clamps, ensures dust proofing
• Wishbone mechanism for perfect bottom frame alignment and hinging
• Surface finish in epoxy polyester powder coating lends higher corrosion resistance & life long finish
• Driver prewired upto terminal block
• Suitable for Class 10,000 & 100,000 cleanroom applications
• Conforms to IS10322/ Part 5/ Sec. 1: 1987

• Loop-in, loop-out facility to save cost of cables and switches
• Suitable for 19 mm ET cable entry

• 19 mm OD knock-outs provided on the Housing for suspension

Product Details:

Additional Information:

• Item Code: LM25-481-XXX-65-G1