KEI Cables and Wires

Product Details:

" KEI " Make, Stranded (Class 2) Circular Non Compacted Annealed Tinned Copper Conductor, Extruded XLPE Insulated Core, two cores twisted to form a pair, Each Pair/Triad is individually screened with Backed Aluminium Myler Tape alongwith Drain Wire (Not Applicable for single pair/Traid) , Multi Pair/Traid Laid up, Laid Up Pairs Overall screened with Backed Aluminium Myler Tape alongwith Drain Wire, Innersheathed with PVC Type -ST2 Compound, Galvanised Steel Round Wire (W) / Flat Strip (F) Armoured and Overall Extruded PVC Type-ST 21 Compound Outer sheathed Electric Cables Generally conforming to your enquiry specification, IS 7098 Part - 1 & BS 5308 Part 1.

Product Details:

• Used for power transmission and distribution line with voltage rated at 35kV and below.
• Compared with PVC Insulated Power Cable, xlpe power cable boasts not only characteristics of excellent electricity, mechanism, heat and aging-resistant, environment stress-resistant and chemical corrosion-resistant, but also simple structure, light weight, no restriction by laying drop, and high temperature allowance for long-term working.

Product Details:

Application:

• Indoor or outdoors in cable ducts, cable trays, conduits or underground locations udner mechanical stresses in power and switching stations. Local dustribution systems, industrial and Commercial units for basic power & lighting purpose.

Construction:
Conductor:

• Aluminium/ Annealed plain copper solid/ stranded conductro conform to BS 6360 and IEC 60228, Class2 (Circular/ Sector shaped)

Insulation:

• Cross linked polyethylene (XLPE)
• Single core: Redor or Black
• 2 Core: Red, Black
• 3 Core: Red, Yellow, Blue
• 4 Core: Red, Yellow, Blue, Black & Yellow-Green
• 6 Core & above: Black colour with number printing

Assembly:

• Inslulated conductors are laid up together, if necessary interstices may be filled with fillers.

Filler:

• Non-hygroscopic Poly propylene fillers are included between laid up cores wherever required. A separator tape of non- ygroscopic poly propylene material is applied over laid up cores wherever necessary.

Bedding:

• Extruded PVC compatible with operating temperature.

Armour:

• For Single Core-Aluminium round wire/ flat wire.
• For multicore-Galvanised Steel round wire/ flat wire/ tape.

Outer Sheath:

• Extruded PVC / Special PVC compound such as Flame Retardant (FR). Flame Retardant Low Smoke (FR LS). Low Smoke Zero Halogen (LSOH) can be used for outer sheath to suit a variety d environment and fire risk conditions. Flamabillity test confirms to EC 332 & Swidish chimeny. For installation where fire and associated problems such as emission of smoke and toxic fumes offer a serious potential threat. special LSF (Low smoke &fumes) compound can be provided. LSF compound is Halogen free (Flourine. Chlorine. Bromine) when tested as per BS 6425 (Pt 1) & IEC 60754 (Pt 1). The acid gas evolved during combustion is less than 0.5%by weight of material.
• Minimum Bending radius:12 times the cable diameter
• Admissible Pulling Force: Aluminium-30N/mm sqr Copper-50N/ mm sqr

Product Details:

We are assisted by a crew of experienced personnel who are enormously indulged in bringing forth a broad gamut of HT Cables.

Features:

• Durable
• Reliable
• Excellent quality
• Various lengths

Product Details:

Product Details:

Product Details:

Application:

• Power cables for medium voltage (upto
• 33KV) are used in — outdoor cable ducts.
• cable trays. conduits or underground
• locations under mechanical stresses in
• power and switching stations, local
• distrtution systems and industrial plants.

Constructions:
Conductor:

• Aluminium / Annealed Plain Copper Stranded
• compacted circular conductor conform to BS
• 6360 and IEC 60228, class 2

Conductor Screening:

• Semi-Conducting layer over conductor

Insulation:

• Cross linket Polythylene to (XLPE)

Insulation Screening:

• Semi-Conducting layer over insulation, in combination with Copper tape.

Core Color:

• Single Core-Natural
• Multi Core-Numbered or colour polyster tapes applied over Copper tapes

Bedding:

• Extruded PVC

Armour:

• Single Core-Non-magnetic (Aluminium) wire flat wire Multi core-Galvanised steel wire / Flat wire/ Tape

Outer Sheath:

• Extruded PVC/ Special PVC compound such as Flame Retardant (FR), Flame Retardand Low Somke (FRLS), Low Smoke Zero Halogen (LSOH) can be used for outer sheath to suit a variety of environment and fire risk conditions. Flamabillity test confirms to IEC 332. For installation where fire and associated problems such as emission of smoke and toxic fumes offer a sirious potential threat, special LSF (low smoke & fumes) compound can be provided. LSF compound is Halogen free (Flourine, Chlorine, Bromine ) when tested as per BS 6425 (pt 1) & IEC 60754 (Pt 1). The acid gas evolved during combustion is less than 0.5% by weight of material.

 

Specifications:

 

Test Voltage:

Product Details:

Application:

• Indoors or Outdoors in cable ducts. cable trays. conduits or underground locations under mechanical stresses in power and switching stations. — Local distribution systems. Industrial and Commercial unts for basic power & lighting purpose.

 

Construction:
Conductor:

• Aluminium/ Annealed plain copper solid/ stranded conductro conform to BS 6360 and IEC 60228, Class2 (Circular/ Sector shaped)

Insulation:

• PVC type Tl1 as per BS 7655: section 3.1 and PVC type A as per IEC 60502-1
• Single core: Redor or Black
• 2 Core: Red, Black
• 3 Core: Red, Yellow, Blue
• 4 Core: Red, Yellow, Blue, Black & Yellow-Green
• 6 Core & above: Black colour with number printing

Assembly:

• Inslulated conductors are laid up together, if necessary interstices may be filled with fillers.

Filler:

• Non-hygroscopic Poly propylene fillers are included between laid up cores wherever required. A separator tape of non- ygroscopic poly propylene material is applied over laid up cores wherever necessary.

Bedding:

• Extruded PVC compatible with operating temperature.

Armour:

• For Single Core-Aluminium round wire/ flat wire.
• For multicore-Galvanised Steel round wire/ flat wire/ tape.

Outer Sheath:

• Extruded PVC / Special PVC compound such as Flame Retardant (FR). Flame Retardant Low Smoke (FR LS). Low Smoke Zero Halogen (LSOH) can be used for outer sheath to suit a variety d environment and fire risk conditions. Flamabillity test confirms to EC 332 & Swidish chimeny. For installation where fire and associated problems such as emission of smoke and toxic fumes offer a serious potential threat. special LSF (Low smoke &fumes) compound can be provided. LSF compound is Halogen free (Flourine. Chlorine. Bromine) when tested as per BS 6425 (Pt 1) & IEC 60754 (Pt 1). The acid gas evolved during combustion is less than 0.5%by weight of material.
• Minimum Bending radius:12 times the cable diameter
• Admissible Pulling Force: Aluminium - 3011/mm'
• Unit: Meter/750
  

Product Details:

We are supplier of Flexible Cables. We are one of the best supplier of our area.

Product Details:

We are supplier of Flexible Cables .

Product Details:

With a main aim to accomplish high level of patron trust, we have been engrossed in providing a vast assortment of Unarmoured Cables.

 

Features:

• Reliable

• Durable

• Optimum quality

• Exceptional finish

Product Details:

Features:

• Electrolytic grade copper having 100% purity and having 102% conductivity is used to ensure maximum safety
• Bunching of copper in uniform lay with compact diameter makes stripping and crimping of wires easier & minimizes losses
• High insulation resistance and dielectric strength
• Excellent flame retardant properties
• Enhanced thermal, electrical, mechanical and fire properties

Applications:

• Single core wires can be used in duct, conduit, or aerial wiring for electric power in houses, buildings, flats, apartments, hospitals, factories and also used with UPS, inverter, battery, control panels etc.,

Product Details:

Being one of the reckoned enterprises in the market, we are highly affianced in offering an optimal class gamut of ZHFR Wire to our patrons.

 

Features:

• Reliable

• Quality assured

• Fine finish

• Durable nature

Product Details:

Application:

• Installation in surface mounted or embedded conduits or similar closed systems. indoors. bulding wires, power cords and domestic electrical wiring purpose.

Test Voltage:

• After immerse in water for 12 hourse test voltage applied for 5 minutes Thickness of insulation upto and including

Type of:

• 2491LSF, 6491X, 6491LSF, 6241Y, 6242Y, 6243Y, 6181XY, 6181LSF, 318Y

Wires/ Cords:

• 309Y, 218Y, 318LSF, 638TQ, 318TRS, 318TO, 318XY, 380TQ, 680TQ

Conductor:

• Solid (class 1), Stranded (Class 2), Flexible (Class5), annealed copper conductor conforming to BS 6360 or IES 60228

Insulation:

• Poly vinly Chloride (PVC), Heat resistant (HR) PVC, Fire Retardant (FR) PVC, Fire Retardant Low Smoke (FRLS) PVC, Zero Halogen (LSOH), Themosetting (XLPE, Rubber etc.)

Available Color:

• Green/ Yellow, Blue, Red, Black, Grey White any other colours on request

Sheath (Multicore):

• Poly Vinyl Chloride (PVC), Heat resistant (HR) PVC, Fire Retardant (FR) PVC, Fire Retardant Low Smoke (FRLS) PVC, Zero Halogen (LSOH)

 

Comparitive Properties:

Product Details:

KB manufactures a wide variety of cables suitable for process instrumentation. which plays a vital role in measurement supervision and control of the process. Introduction of microprocessor based / computerized instrumentation has demanded stringent quality requirements along with special electrical parameters for instrumentation cables. The cables used for instrumentation are designed and manufactured very meticulously. KEI maintains high quality standards and follow & stringent in-process quality control during manufacturing of instrumentation cables. meeting the design parameters of the customer

Conductor:

• 0.5 Sq. mm to 2.5 Sq mm of sohdistranded Tinned;untinned copper conductors

Insulation:

• PVC/Polyethylene/XLPE/LSOH as per requirement

Elements / Core:

• Pair/Triada ad. colour coded' number printed.

Screening:

• Aluminium Polyester screen over all (collective) screen (OAS). individual screen (IS). or both IS & OAS with ATC drain wire. Wire braiding can also be given as per customer requirement.

Element Laying:

• Concentric formation or unit & group formation as per requirement.

Armouring:

• Unarmoured Galvanised steel wire! Rat wire armoured.

Sheathing:

• PVC. FR PVC. FRLS. LSOH as per requirement.

Specifications:

• EIL-6-52-46. Rev.05, BS: 5308 Part 1 & Part 2. BSC 143-0.75 (2410.2 mm) OAS. IEC 60092-375. 376. BS EN 50288. VDE 0815, VG 95218. NEK 606 and customers Specifications.)

Product Details:

In Keeping with the commpany's commitment to technological
advancement. elastomer materials such as Ethylene Propylene Rubber  'EPR", Polychbroprene "PCP", Chloro Su!phonated Polyethylene IC  SP' Nitrile Rubber / PVC Blends, Ethylene Vivyl Acetate 'EVA' and  Silicone Rubber have been specially compounded to meet numerous  heat oil and fie resisting requirements. In the recent years KEI  has also developed special Elastomeric Are Survival Cables for  power, control and instrumentation wiring. Elastomeric compounds  for insulating and sheathing of cables are formulated to meet the requirement of BS 6899, IEC 60502 and IEC 60092 other
international specification.

GENERAL CONSTRUCTION 'Conforming to IS 9968 Part I'

Conductor:

• Annealed tinned Copper wires Solid 'Class 1', Stranded 'Class 2' flexble °Class 5' complying with the requirement of BS 6360/IE 60228

Scperator Tape:

• Suitable Material Seperator Tape may be applied over the conductor

Insulation:

• General Service elastomer compound / Heat Resisting elastomer compound / Silicone rubber as per IEC 60092 '351', BS-7655, VDE- 0207Pt.-20

Core Identification:

• Coloured insulation, Not Polyester tape, Coloured proofed tape, Nos. printing.

Fillers:

• Natural or synthetic fibers or elastomer suitable for the operating temperature and compatible with the insulating material.

Sheath:

• General Service elastomeric compound! Heavy Duty elastomeric compound as per IEC 60092'359'. BS-7655, VDE 0207Pt.-21

 

Working Temperature of comonly Used Elastomeric Insulating and Sheathing Material